Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, designs and engineers driven tool holders and static tooling for the Nakamura-Tome AS-200LS (15-station) on the open machine-side BMT and VDI (DIN 69880) standards. The turret interface for this model is confirmed by Mongtec engineering against the actual turret drawing at RFQ, and every driven unit ships with an individual inspection report.
| Machine brand | Nakamura-Tome |
|---|---|
| Model | AS-200LS (15-station) |
| Turret interface | Confirmed per machine configuration at RFQ (not yet published for this model — the public machine specifications are not consistent; Mongtec engineering confirms it against the actual turret drawing) |
| Driven tool holders | Axial, radial, adjustable-angle, twin-output, high-speed and geared-down units |
| Static tooling | Turning, boring bar, facing, cut-off and blank holders |
| Inspection | Individual inspection report with every driven unit |
| Origin | Taiwanese brand, designed and engineered in Taichung, Taiwan |
This catalogue entry is the 15-station build. Station count changes the turret on many machines, so the build must be confirmed before a holder is quoted.
Machine builders routinely ship the same model with more than one turret. These are all published, verified examples:
| Machine | What changes | Turret mounting |
|---|---|---|
| Hardinge Conquest H51 | station count | 12-station = BMT55 · 16-station = BMT45 |
| Okuma GENOS L300 | model suffix | L300 M = VDI40 · L300 MW/MYW = 65×73 bolt pattern |
| DMG MORI ALC / ALX 1500–2500 | turret build | BMT40 or BMT42/64 |
| Takisawa TS-3000 / 4000 | key count | 2-key and 3-key turrets are not interchangeable |
It is the most common reason a driven tool holder arrives and will not bolt on. Reference table: 38 BMT turret bolt patterns by machine builder →
Send the machine model and a photo of the turret face — we confirm the fit before quoting →
We have not published a figure for this model because the public machine specifications do not state it consistently, and a guessed figure is worse than a blank field. Send the machine model and a photograph of the turret face and Mongtec engineering confirms it against the actual turret drawing. That check is free and takes one email.
The full dimensioned drawing and the confirmed article number are supplied by email once an enquiry is open, so they match your actual machine and turret configuration.
Yes. Special angles, extended reach, high-pressure internal coolant and non-standard mountings are built to order. Describe the operation and the machine.
All Nakamura-Tome models · Driven tool holder types and turret interfaces · Published article numbers · Static turret tooling