Axial multi-spindle holders carry several parallel outputs on one station, so a bolt circle or a hole pattern is produced in a single stroke. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, builds them to mount on Hyundai WIA turrets, published for BMT45, BMT55, BMT65.
Specially engineered for WIA(Hyundai) multitasking turning-milling centers, our 0° multi-axis driven toolholders feature a dual-tool position design to significantly boost machining efficiency and capacity utilization. It is the ideal solution for high-cycle and multi-process integrated machining requirements.
By maintaining high-precision positioning while enabling multiple machining steps in a single setup, this toolholder reduces tool-change intervals and downtime costs, providing a highly competitive edge for high-efficiency production environments.
31 Hyundai WIA models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| E160LM, E200M / SKT100M, 160LM | — | — |
| KL7000, 8000LY | — | — |
| L150, 210 LMA/LMSA / SKT15, 21LM | — | — |
| L150 SY | — | — |
| L160, 230MA/LMA/LMSA | — | — |
| L200, 250Y/SY / SKT200, 250Y/SY | — | — |
| L280LM / SKT28LM | — | — |
| L300MA/MC/LMA/LMC/ MSA/MSC/LMSA | — | — |
| L400,4000,5100 M/LM/MC/LMC/LY | — | — |
| L500LMA | — | — |
| L600, 700, 800MA/LMA | — | — |
| L2100Y/SY | — | — |
| L2000, 2600, 3000Y/LY/SY/LSY | — | — |
| HD2200, 2600M/Y/SY (BMT55) | BMT55 | — |
| HD2600, 3100M/Y/YA/SY/SYA (BMT65) | BMT65 | — |
| LM1600, 1800, 2200 TTMS/TTSY | — | — |
| LM2000, 2500TTM/TTMS/TTSY | — | — |
| LV450RM/LM | — | — |
| LV500, 8500RM/LM | — | — |
| LV800RM/LM / SKT-V80RM/LM | — | — |
| LV1100RM | — | — |
| SE2000MA/MC | — | — |
| SE2200M/MS/LSY (BMT45) | BMT45 | — |
| SE2600M (BMT55) | BMT55 | — |
| SKT160, 180TTMS/TTSY (BMT55) | BMT55 | — |
| SKT200, 250TTM/MS/SY | — | — |
| SKT210SY | — | — |
| SKT250, 300M/MS | — | — |
| SKT400M/LMC | — | — |
| SKT600, 700LM | — | — |
| XM2600, 3100ST | — | — |
All machine builders for 0° multi-axis driven toolholders →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.