Universal holders let the output be set at any angle between 0° and 90°, so angled holes and angled faces are cut without a dedicated holder for each angle. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, builds them to mount on Hyundai WIA turrets, published for BMT45, BMT55, BMT65.
Engineered specifically for WIA(Hyundai) multitasking turning-milling centers, our Universal Driven Tools feature multi-angle adjustment capabilities to meet the most demanding requirements for complex angular machining.
Through its adjustable-angle design, the machine can flexibly perform angular hole drilling, variable-angle milling, and special pattern machining. This effectively expands the machining range while reducing the need for secondary setups and reliance on specialized fixtures.
31 Hyundai WIA models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| E160LM, E200M / SKT100M, 160LM | — | — |
| KL7000, 8000LY | — | — |
| L150, 210 LMA/LMSA / SKT15, 21LM | — | — |
| L150 SY | — | — |
| L160, 230MA/LMA/LMSA | — | — |
| L200, 250Y/SY / SKT200, 250Y/SY | — | — |
| L280LM / SKT28LM | — | — |
| L300MA/MC/LMA/LMC/ MSA/MSC/LMSA | — | — |
| L400,4000,5100 M/LM/MC/LMC/LY | — | — |
| L500LMA | — | — |
| L600, 700, 800MA/LMA | — | — |
| L2100Y/SY | — | — |
| L2000, 2600, 3000Y/LY/SY/LSY | — | — |
| HD2200, 2600M/Y/SY (BMT55) | BMT55 | — |
| HD2600, 3100M/Y/YA/SY/SYA (BMT65) | BMT65 | — |
| LM1600, 1800, 2200 TTMS/TTSY | — | — |
| LM2000, 2500TTM/TTMS/TTSY | — | — |
| LV450RM/LM | — | — |
| LV500, 8500RM/LM | — | — |
| LV800RM/LM / SKT-V80RM/LM | — | — |
| LV1100RM | — | — |
| SE2000MA/MC | — | — |
| SE2200M/MS/LSY (BMT45) | BMT45 | — |
| SE2600M (BMT55) | BMT55 | — |
| SKT160, 180TTMS/TTSY (BMT55) | BMT55 | — |
| SKT200, 250TTM/MS/SY | — | — |
| SKT210SY | — | — |
| SKT250, 300M/MS | — | — |
| SKT400M/LMC | — | — |
| SKT600, 700LM | — | — |
| XM2600, 3100ST | — | — |
All machine builders for universal driven tools →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.