The Spinner TC 600 SMCY uses a BMT45 turret interface. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies driven tool holders and static tooling on the open machine-side BMT and VDI (DIN 69880) standards used by this machine class. The exact Mongtec model for your machine configuration is confirmed by Mongtec engineering at RFQ, and every driven unit ships with an individual inspection report.
| Machine brand | Spinner |
|---|---|
| Model | TC 600 SMCY |
| Turret interface | BMT45 |
| Driven tool line speed | 6,000–12,000 rpm standard (up to 32,000 rpm with speed increaser) |
| Max torque | Up to 160 Nm (line capability; unit rating confirmed at RFQ) |
| Coolant | Internal / external, up to 100 bar |
| Runout | ≤0.003 mm (0° axial driven line) |
| Quality assurance | Each driven unit ships with an individual inspection report |
Same model, different turret: station count, model suffix and build year change the turret interface. Mongtec confirms the interface from the machine model and a turret photo before quoting.
TOOL HOLDER SELECTION GUIDE Ver 2026.08 (PDF, 2.6 MB)
| Article no. | Tool clamping |
|---|---|
| M97084 | 20 |
| M53284 | 20 |
| M87084 | 20 |
| M64784 | 20 |
| M16284 | 20 |
| M85284 | 20 |
| M03185 | 20 |
| M63284 | 20 |
| M95284 | 20 |
| M82185 | Ø20 |
| M44384 | Ø25 |
| M94084 | Ø32 |
| M49084 | Ø40 |
| M14384 | Ø32 |
| M92185 | Ø32 |
| M26284 | Ø32 |
| M51184 | SH26 WIDTH 26 |
| M61185 | SH26 WIDTH 26 |
| M09084 | SH26 WIDTH 26 |
| M4107 | ER25 1-16 |
| M1007 | ER25 1-16 |
| M2007 | ER25 1-16 |
Article numbers with a specification page on this site: M0407, M2007, M3307, M6007, M7001, M7014, M8007, M8307, M9407
Mongtec also supplies BMT40, BMT60, BMT68 and BMT80 holders and builder-specific interfaces (Mazak, Nakamura-Tome, Haas BOT, Okuma BOT, Muratec BOT) — the 228 article numbers published here are a subset of the range. Mongtec tooling is exported to five continents and supplied to machine-tool builders. Lead time is confirmed per item and quantity at quotation.
Request a quote for this machine
| Article no. | Type | Collet / coupling | Ratio | Max speed | Torque |
|---|---|---|---|---|---|
| M0407 | Axial Tool Holder | — | 1:1 | 6000 rpm | 25 Nm |
| M7001 | Axial Tool Holders-B45,External Coolant | ER25 | 1:1 | 8000 rpm | 40 Nm |
| M6007 | Axial Tool Holders-B45,Internal/Through Coolant | ER25 | 1:1 | 6000 rpm | 40 Nm |
| M8307 | Radial Tool Holder | — | 1:1 | 6000 rpm | 25 Nm |
| M8007 | Radial Tool Holders -B45,External Coolant | ER20 | 1:1 | 8000 rpm | 25 Nm |
| M2007 | Radial Tool Holders -B45,External Coolant | ER25 | 1:1 | 8000 rpm | 40 Nm |
| M3307 | Radial Tool Holders -B45,Internal/Through Coolant | ER25 | 1:1 | 8000 rpm | 40 Nm |
| M7014 | Axial Tool Holders-B45,External Coolant | ER25 | 1:1 | 6000 rpm | 40 Nm |
| M9407 | Axial Tool Holders-B45,Internal/Through Coolant | ER25 | 1:1 | 8000 rpm | 40 Nm |
Listed from the Mongtec Tool Holders — VDI & BMT, Ver 2026.3 catalogue for the BMT45 turret interface. This is the published range for that interface size, not a confirmed fit for this specific machine configuration — Mongtec engineering verifies interface dimensions, clearance and drive coupling per machine at RFQ. Ask engineering to confirm →
This machine uses a BMT45 turret interface. Mongtec publishes the following static (non-driven) turret holders for BMT45 — OD, double-OD, ID and face types:
Ordering codes are machine-builder specific. The designations below identify the holder type and its dimensions. Because mounting details differ between machine builders even within the same nominal turret size, the same BMT specification can carry a different Mongtec article code depending on the machine it is built for — Mongtec engineering assigns the correct code for your machine at RFQ.
| Turret | Holder type | Type designation | C | K | G | H | X | A | B | E | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| BMT45 | OD | C6020 | 75 | 110 | 60 | 20 | 20 | 15 | 58 | 58 | 2.49 kg |
| BMT45 | OD | C7020 | 85 | 110 | 70 | 20 | 20 | 15 | 58 | 58 | 3.43 kg |
| BMT45 | OD | C8025 | 85 | 110 | 80 | 25 | 25 | 15 | 58 | 58 | 3.92 kg |
| BMT45 | ID | B6040 | 75 | 95 | 88 | 60 | 40 | 15 | 58 | 58 | 3.50 kg |
| BMT45 | ID | B6532 | 75 | 95 | 88 | 65 | 32 | 15 | 58 | 58 | 3.35 kg |
| BMT45 | ID | B8032 | 75 | 95 | 110 | 80 | 32 | 15 | 58 | 58 | 4.43 kg |
| BMT45 | Face | F6020 | 75 | 85 | 60 | 20 | 20 | 15 | 58 | 58 | 2.26 kg |
| BMT45 | Face | F7032 | 90 | 86 | 70 | 32 | 32 | 15 | 58 | 58 | 3.20 kg |
| BMT45 | Face | F8020 | 75 | 85 | 80 | 20 | 20 | 15 | 58 | 58 | 3.04 kg |
| BMT45 | Face | F8525 | 90 | 86 | 85 | 25 | 25 | 15 | 58 | 58 | 3.82 kg |
Dimensions in mm, from the Mongtec Static Turret Toolholders, Ver 2026.07 catalogue. Machine platforms named for the BMT45 turret size in that catalogue: DN Solutions (Doosan), Hardinge, Jyoti, Samsung (SMEC), Spinner, Victor. This is the published range for those turret sizes, not a confirmed fit for a specific machine configuration — Mongtec engineering verifies interface dimensions, clearance, shank size and the correct article code per machine at RFQ. Ask engineering to confirm →
Mongtec publishes 7 BMT45 driven (live) tool holder article numbers, each with collet, gear ratio, maximum speed and torque. Browse all BMT45 article numbers →
Representative photographs of Mongtec driven and static turret tooling in the BMT45 class. These are production units from the Mongtec range, not renderings — but they are shown as examples of the BMT45 product family, not as the confirmed article number for this machine. Mongtec engineering verifies the interface, clearance and correct article code for your specific machine at RFQ.
Mongtec supplies BMT and VDI (DIN 69880) driven tool holders and static tooling compatible with the Spinner turret platform. Interface: BMT45. The exact configuration is confirmed by Mongtec engineering at RFQ.
Yes. BMT and VDI are open machine-side standards, so switching supplier does not require any turret modification. Mongtec also publishes cross-reference pages for WTO, Heimatec, EWS, Eppinger, BIG and other brands.
Lead time is quoted per order and ships from Taichung, Taiwan. Every Mongtec driven tool holder is inspected before shipment (runout, torque, balancing) and ships with an individual inspection report.
All BMT45 driven tool holders · BMT45 static turret holders · All 228 article numbers with full specification · How to choose a driven tool holder · PSC / ISO 26623 tooling
Machine builders regularly ship the same model with different turrets — station count, model suffix and the number of keys all change the mounting. The Hardinge Conquest H51 is BMT55 in the 12-station build and BMT45 in the 16-station build; the Okuma GENOS L300 M is VDI40, while the L300 MW/MYW uses a 65×73 mm bolt pattern. This is the single most common reason a driven tool holder arrives and will not bolt on. BMT bolt pattern reference — 38 patterns by machine builder →
Send your model and a photo of the turret face — we confirm the fit before quoting →
Whether a holder mounts is decided by the turret bolt pattern and the drive coupling, not by the machine name alone. The types below are published by Mongtec for this interface; the exact article number is confirmed against the actual turret drawing at RFQ.
BMT45 article numbers · BMT bolt pattern reference (38 patterns) · All driven tool types and turret interfaces