Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies driven tool holders and static tooling for the Nakamura-Tome WT-150 / WT-150 II on the open machine-side BMT and VDI (DIN 69880) standards. The turret interface for this model is confirmed per machine configuration by Mongtec engineering at RFQ, and every driven unit ships with an individual inspection report.
| Machine brand | Nakamura-Tome |
|---|---|
| Model | WT-150 / WT-150 II |
| Turret interface | BMT bolt pattern 50x60 (bolt pattern cross-referenced from published tooling catalogues; the actual turret drawing is confirmed at RFQ) |
| Driven tool line speed | 6,000–12,000 rpm standard (up to 32,000 rpm with speed increaser) |
| Max torque | Up to 160 Nm (line capability; unit rating confirmed at RFQ) |
| Coolant | Internal / external, up to 100 bar |
| Runout | ≤0.003 mm (0° axial driven line) |
| Quality assurance | Each driven unit ships with an individual inspection report |
Nakamura-Tome turret rule: the BMT44, BMT55 and BMT65 turrets on Nakamura machines are Nakamura-specific designs — standard catalogue BMT holders do not fit them. Mongtec supplies holders to the Nakamura interface and supplies them regularly. Where a Nakamura machine carries a VDI40 turret, standard VDI40 applies.
TOOL HOLDER SELECTION GUIDE Ver 2026.08 (PDF, 2.6 MB)
Models listed in this catalogue section: BOLT HOLE PATTERN - 60 × 50 mm / WT150, 250 / WT150II, 250II / WTW150 / WTS150 / SUPER NTM3 / / SUPER NTJ / SUPER NTJX / SC150, 200, 250 / NTY3 250 / / TW10M, MY, MM, MMY, MMYY / / TW20M, MY, MM, MMY, MMYY (16 ST) / / WY250 / AS200 (15, 24 ST)
| Article no. | Tool clamping |
|---|---|
| M98584 | 20 |
| M38185 | 25 |
| M90385 | 20 |
| M28584 | 25 |
| M59784 | 20 |
| M68584 | Ø25 |
| M38584 | Ø32 |
| M21385 | Ø40 |
| M77185 | Ø40 |
| M80485 | Ø40 |
| M31385 | SH32 |
| M2417 | ER25 1-16 |
| M3417 | ER25 1-16 |
Article numbers with a specification page on this site: M0407, M2007, M3307, M6007, M7001, M7014, M8007, M8307, M9407
Mongtec also supplies BMT40, BMT60, BMT68 and BMT80 holders and builder-specific interfaces (Mazak, Nakamura-Tome, Haas BOT, Okuma BOT, Muratec BOT) — the 228 article numbers published here are a subset of the range. Mongtec tooling is exported to five continents and supplied to machine-tool builders. Lead time is confirmed per item and quantity at quotation.
Request a quote for this machine
See all Nakamura-Tome models →
Mongtec supplies BMT and VDI (DIN 69880) driven tool holders and static tooling compatible with the Nakamura-Tome turret platform. Interface: BMT bolt pattern 50x60. The exact configuration is confirmed by Mongtec engineering at RFQ.
Yes. BMT and VDI are open machine-side standards, so switching supplier does not require any turret modification. Mongtec also publishes cross-reference pages for WTO, Heimatec, EWS, Eppinger, BIG and other brands.
Lead time is quoted per order and ships from Taichung, Taiwan. Every Mongtec driven tool holder is inspected before shipment (runout, torque, balancing) and ships with an individual inspection report.
This turret does not use a plain BMT size number. BMT is an industry de-facto standard, not an ISO or DIN standard, so builders such as Nakamura-Tome, Okuma, Miyano, Muratec and Takisawa use their own bolt-hole patterns. The pattern — here 50x60 mm — is what actually determines whether a holder bolts on. How BMT bolt patterns differ by machine builder →
Mongtec supplies holders for this pattern. Send us the turret drawing or the machine serial number and we confirm the fit before quoting — request a quotation →
A Nakamura-Tome BMT turret is a different design from the standard BMT sizes in the Mongtec catalogue — the bolt pattern is Nakamura’s own, so catalogue BMT article numbers do not apply to this machine and should not be ordered against it. Mongtec designs and supplies tooling built to the Nakamura interface, and does a great deal of it.
Mongtec driven and static tool holders are exported worldwide across five continents, and are supplied to machine tool manufacturers as well as to end users. Lead time is confirmed against the items and quantity you need.
To quote we need: the machine model and turret designation, the station count, a turret interface drawing or a clear photo of the turret face, the holder orientation (axial or radial) and the clamping or collet size you need, and the quantity. A drawing of the holder you are replacing works just as well.
Email info@mongtec.com to discuss your application and request drawings, or send an enquiry here. Mongtec engineering will confirm the fit against your turret before anything is quoted.
All 228 article numbers with full specification · How to choose a driven tool holder · PSC / ISO 26623 tooling
Machine builders regularly ship the same model with different turrets — station count, model suffix and the number of keys all change the mounting. The Hardinge Conquest H51 is BMT55 in the 12-station build and BMT45 in the 16-station build; the Okuma GENOS L300 M is VDI40, while the L300 MW/MYW uses a 65×73 mm bolt pattern. This is the single most common reason a driven tool holder arrives and will not bolt on. BMT bolt pattern reference — 38 patterns by machine builder →
Send your model and a photo of the turret face — we confirm the fit before quoting →
This machine is documented by its turret bolt pattern (50×60 mm), not by a nominal BMT size — the bolt pattern is what decides whether a holder mounts. Mongtec publishes the driven tool types below and builds to machine-specific patterns; the article number is confirmed against the actual turret drawing at RFQ.
BMT bolt pattern reference (38 patterns) · All driven tool types and turret interfaces