Mongtec Alternatives to Madaula CA-Series Angle Heads and BMT/VDI Live Tooling

Madaula to Mongtec Cross-Reference Table — 90° Angle Head

Madaula column sourced from https://madaula.com/categoria-de-producto-angle-head/ca-series/, accessed 2026-07-10 (MADAULA, S.A., Sant Fost de Campsentelles, Barcelona, Spain). Mongtec column sourced from Mongtec internal engineering spec sheet, verified 2026 (https://www.mongtec-tools.com/en-US/p296-bt30qer11, accessed 2026-07-10).

Why Machine Shops Consider Mongtec: Lead Time, Support, and Cost

Lead Time

Madaula manufactures in Barcelona, Spain and supports customers through distributors and subsidiaries across Europe and other regions, which for buyers outside the EU typically means longer freight and customs transit compared to sourcing from Taiwan. Mongtec is a Taiwanese tooling brand supplying BT-interface angle heads and BMT/VDI driven tools directly, which can shorten quote-to-ship time for shops open to a functionally equivalent interface rather than an exact Madaula part number.

Local Support

Madaula describes itself as having "over 65 years of experience" designing and manufacturing heads for the machine tool industry, headquartered in Sant Fost de Campsentelles, Barcelona, with a presence at major international trade shows including BIMU (Milan), SIMODEC (France), INNOTEQ (Switzerland), and EXPOMAFE (Brazil) (source: https://madaula.com/, accessed 2026-07-10). Madaula's public site does not list a specific employee count. Mongtec supports customers directly from Taiwan with engineering-verified spec sheets and quote turnaround for shops that need cross-reference support without navigating a multi-tier European distributor network.

Total Cost of Ownership

Madaula's CA-Series spans a wide range of sizes up to CA-3 (ISO-40, 20kW, 130 Nm torque class), reflecting its focus on heavy-duty and special/custom angle-head engineering for automotive and general industrial machining. Mongtec's BT30-QER11 targets the smaller, high-volume end of the same category at a lower landed cost for job shops that don't need Madaula's full custom-engineering catalog.

Specification Verification: How We Match Interface Dimensions

Mongtec's BT30-QER11 dimensions are drawn from Mongtec's internal engineering spec sheet, verified against the published product page at https://www.mongtec-tools.com/en-US/p296-bt30qer11 (accessed 2026-07-10). Madaula's CA-0C figures (ER-11/7mm output, 4,000 rpm max, 1 kW power, 3.5 kg weight, 1:1 ratio, torque figure "4") come directly from Madaula's CA-Series product category page (accessed 2026-07-10); Madaula's page does not state the input shank/taper for this model on the category listing itself, so shops verifying an exact swap should request the model's individual PDF spec sheet (linked from the category page) and compare shank dimensions against Mongtec's BT30 spec before ordering.

Which Madaula Products Have a Mongtec Equivalent?

• Mongtec BT30-QER11 Angle Head – closest published match to Madaula's CA-0C/CA-0E small-output angle heads
• Mongtec BMT & VDI Driven Tool Holders – relevant category for shops cross-referencing Madaula's BMT/VDI live tooling for CNC lathes, though Madaula does not publish a generic interface-size spec table for that line
• Mongtec CNC Mill Tool Holders (Shrink-Fit/Hydraulic/ER/Power-Milling) – for shops also reviewing Madaula's Heads & Accessories line for milling/boring/portal machines

Replacing a Madaula CA-Series angle head

If a Madaula CA-Series unit on your machine is worn, damaged or discontinued, you do not need the original article number to replace it. Send the model number, the name plate photo, or the drawing of the angle head you run today — Mongtec engineering cross-references the mounting, coupling and output geometry and quotes a suitable Mongtec article, stating clearly which dimensions were confirmed. Repair of the existing unit is sometimes the better answer; where we see that, we say so.

When Mongtec is a sensible alternative to Madaula — and when it is not

Mongtec publishes this comparison so buyers can judge the swap themselves. It is not a claim that one brand is better than the other — the two are different companies with different ranges, and the right choice depends on the machine and the job.

Cases where a Mongtec unit is a reasonable swap

• you are adding or replacing driven units on an installed BMT or VDI turret
• the process is proven and you need more of the same
• unit cost or delivery on the original has become the limiting factor

Cases where you should stay with Madaula

• you are standardised on Madaula's own quick-change system
• the units are covered by a machine-builder package you do not want to disturb
• you need a special head Mongtec has not confirmed for your machine

Send it to info@mongtec.com or use the enquiry form. A drawing or a photo of the unit on the turret speeds this up; neither is required to start.

FAQ

Is Mongtec's BT30-QER11 a direct drop-in replacement for a Madaula CA-Series angle head?

The ER11 collet output is a direct match to Madaula's CA-0C model, but Madaula's category listing does not publish the input shank/taper for that specific model, so the shank interface must be confirmed against the individual Madaula spec sheet before treating this as interchangeable.

Does Mongtec offer a BMT or VDI equivalent to Madaula's live tooling line?

Yes, Mongtec's BMT & VDI Driven Tool Holders category covers this space, but because Madaula organizes its BMT/VDI live tooling by machine-tool brand (Doosan, Biglia, EMAG, Mazak, Mori Seiki, Nakamura, Okuma) rather than by generic interface size, a precise spec-for-spec table is not possible from Madaula's public materials alone. Contact Mongtec with your specific lathe brand and turret model for a cross-reference.

What torque unit does Madaula use on its CA-Series category page?

Madaula's public category table lists a numeric torque value (e.g., "4" for the CA-0C) without an explicit unit label on that page. Based on Madaula's broader catalog convention this is presumed to be Nm, but shops should confirm via the model's individual PDF spec sheet before relying on it for a torque-critical application.

Where is Madaula's manufacturing located, and how does that affect lead time?

Madaula manufactures in Sant Fost de Campsentelles, Barcelona, Spain, and distributes internationally through subsidiaries and trade-show presence across Europe, the Americas, and Asia. International shipments from Spain typically carry longer lead times for non-EU buyers than sourcing directly from a Taiwanese tooling brand for functionally equivalent parts.

Does Madaula offer adjustable-angle heads like Mongtec?

Madaula's CAR Series is a 0-90° adjustable angle head, which is broader than Mongtec's currently published fixed 90° BT30-QER11 line. If an adjustable-angle head is required, confirm current Mongtec availability directly, as this may not be a standard catalog item.